Solutions · Manufacturing

Fewer breakdowns, every machine in view, every spare part on the shelf

For metal, plastics, packaging and electronics plants: machine status and OEE, maintenance and spare parts, condition monitoring and the energy of your utilities — on one platform.

  • Machine status & OEE
  • PM, work orders & spare parts
  • Condition monitoring
  • MC Protocol, S7, Modbus, OPC UA

Live plant data

Real machines, live readings

Read from the machines and sensors every few seconds — not collected on a clipboard once a shift

A shop floor of forming machines with chutes and bins, with live readings pinned on it: a machine's output rate, a motor's vibration alarm, machines running and the hall's power Live · MC Protocol · Modbus
Hall A · forming machines21 machines on one shop floor
A CNC machining centre milling an aluminium part with coolant, with spindle load and speed, part count and coolant temperature Live · OPC UA
Machining centre VMC-03Spindle, coolant and part count
An industrial air compressor on its receiver tank, with line pressure, power and load, and running hours until the next service Live · Modbus
Compressor room · CMP-02Compressed air for the whole plant

Photos: Unsplash. Readings are sample data.

What plant and maintenance managers deal with every week

Most of the cost hides in stops nobody planned and parts nobody ordered

Breakdowns instead of planned stops

A bearing or a motor fails mid-shift, when a few days of warning would have made it a planned job.

Maintenance on paper and chat

Requests come by phone and chat groups, PM sits in a spreadsheet, and the history leaves with the technician.

Spare parts: too many or none

The store is full of parts nobody uses, yet the one bearing you need is out of stock.

Utilities nobody watches

Compressors, boilers and idle machines use energy around the clock, and the bill shows only one number.

What AssetGrid does for your plant

Machines, maintenance, spare parts and energy on one set of asset data

Machine monitoring & OEE

Every machine's status, output and stops, live

Read run, count and fault signals from the machines you already have. See the hall at a glance, and let OEE and downtime reasons come from the machines instead of a form.

  • Machine status, output and OEE per machine, line and shift
  • Draw the hall or a line in the screen designer, or show it in 3D, bound to live values
  • Plan versus actual per shift, and Andon calls with escalation

Maintenance & spare parts

Work orders, PM and spare parts in one place

Operators raise requests from the phone, the maintenance team plans and closes work orders, and every part used comes out of a store that knows what to reorder.

  • PM by date, running hours or machine counts, with checklists and approvals
  • Suggested PM intervals from your own breakdown history
  • Spare parts with suggested reorder points and purchase orders to your vendors
  • Technicians work from the Android app: QR scan, checklist, photos and parts used

Condition monitoring

See a machine getting worse before it stops

Vibration, temperature and current tell you a motor or bearing is wearing long before it fails. AssetGrid learns each machine's normal and tells you when it drifts.

  • Condition rules and anomaly detection on any value: vibration, temperature, current, pressure
  • Alarms to the on-call technician, with escalation when nobody responds
  • Trends kept as history, so the fix can be checked against the data

Utilities & energy

Know what your compressors, boilers and machines use

Connect the power meters you already have and see consumption, cost and CO₂ per meter — and the running hours that drive utility maintenance.

  • Consumption, cost and CO₂ per meter, by hour, day or month
  • Compare halls, lines and utilities, and spot energy used while nothing is produced
  • Compressor and boiler service by running hours, counted from their run signal

Every machine and utility, in one asset register

Organised by plant, hall, line and machine — each with its QR label, history, PM plan and spare parts

  • CNC & machining centres
  • Presses & forming machines
  • Injection & extrusion
  • Packaging machines
  • Conveyors & handling
  • Compressors & dryers
  • Boilers & heaters
  • Chillers & cooling towers
  • Motors, pumps & fans
  • Transformers & panels

Example

Motor M-09 starts to vibrate on Tuesday — what happens next

A planned repair on Thursday instead of a breakdown on Friday night

  1. 01

    Drift

    The fan motor's vibration climbs above the normal AssetGrid learned for it.

  2. 02

    Alarm

    The on-call technician is alerted; if nobody responds in time, it escalates to the maintenance supervisor.

  3. 03

    Planned

    A work order is planned for Thursday's stop, and the store confirms the bearing is in stock.

  4. 04

    Fixed

    The technician scans M-09's QR code, replaces the bearing and records the part and photos.

  5. 05

    Learned

    The history sharpens the suggested PM interval, and the bearing's reorder point follows real use.

Works with the machines you already have — old and new

A small collector on the plant network reads the PLCs, meters and sensors you choose

MC Protocol

Mitsubishi PLCs (iQ-R, iQ-F, Q and L series) read directly over Ethernet.

Siemens S7

S7-1200 and S7-1500 PLCs on machines and utilities.

Modbus TCP

Power meters, VFDs, compressor and boiler controllers, and RS-485 devices through a gateway.

OPC UA & MQTT

CNC controllers and SCADA servers over OPC UA; vibration and temperature sensors over MQTT — also for old machines without a PLC.

See AssetGrid with your machines

Start with maintenance and spare parts on web and Android, or with one hall of machines, and grow from there. Every plant is scoped and quoted on its own.

Questions from manufacturing plants

Can we start with maintenance only?

Yes. Many plants start with the asset register, PM, work orders and spare parts on web and Android, and connect machines later.

Our older machines have no PLC. Can they be monitored?

Yes. A small I/O module or sensor gateway gives a run signal, a counter or a vibration reading over Modbus or MQTT, and the collector reads it like any other machine.

We have several plants. Does that work?

Yes. Plants, halls, lines and machines are locations, so assets, work orders, spare parts and reports can be filtered down to one line.

Does it run on our own server?

Yes. AssetGrid can run on a server in your plant, so machine data stays on your network.

Do technicians need a computer?

No. Technicians and operators use the Android app: scan QR codes, follow checklists, add photos, record parts and close work orders.