Solutions · Oil & gas
Every remote site, compressor and tank in view — and every inspection on time
For wellsites, gas compression stations, fuel terminals and LPG plants: live readings from remote sites that survive a dropped link, compressor and pump health, tank levels and alarms, and inspections and maintenance for every asset.
- Remote sites, offline-safe
- Tank levels & alarms
- Inspections on time
- Modbus, OPC UA, MQTT, S7
Live field data
Real sites, live readings
Sent from the field every few seconds — not read off a gauge by someone who drove two hours
Live · Modbus · 4G
Live · Modbus · OPC UA
Live · Modbus · MQTTPhotos: Unsplash. Readings are sample data.
What oil and gas operators deal with every day
Sites are far apart, equipment runs hard, and every inspection has a deadline
Operators drive from site to site to check pressures and levels, and a problem waits until the next visit.
A compressor trip at night stops production until morning, and the early signs were there in the vibration.
Safety valves, pressure vessels, tanks and fire systems all have due dates, tracked in files only one person keeps up to date.
4G and radio links at remote sites drop, and the readings from those hours are simply gone.
What AssetGrid does for your operation
Remote sites, rotating equipment, tanks and inspections on one set of asset data
Remote site monitoring
Every site live — even when the link drops
A collector at each site reads the RTUs, PLCs and flow computers there. When the link drops, it keeps reading and stores the data, then sends it all when the link is back.
- No gaps in the history after an outage
- A standby collector takes over when the main one stops
- Alarms with escalation to the on-call operator, by e-mail and in the app
Compressors & pumps
See a compressor struggling before it trips
Pressures, temperatures, vibration and running hours from every compressor, pump and engine — with rules that learn each machine's normal and alarm when it drifts.
- Condition rules and anomaly detection on vibration, temperature and pressure
- Overhauls and services by running hours, counted from the run signal
- Similar past fixes suggested when a fault repeats
Tanks & terminals
Every tank's level, live, with high and low alarms
Read levels and temperatures from tank gauges and transmitters, set HH, H, L and LL limits, and see the whole terminal on one screen.
- High and low level alarms with escalation, day and night
- Tanks fill and change colour on the 2D and 3D terminal screens
- Every level kept as history for trends and Excel reports
Inspections & maintenance
Every inspection due date, on time and on record
Plan safety valve recertifications, vessel and tank inspections and fire system tests once. AssetGrid raises the work order when each falls due and keeps the evidence with it.
- Inspections by date, services by running hours, with checklists and approvals
- Certificates, reports and photos attached to the work order
- Technicians work from the Android app at the site: QR scan, checklist, photos and parts
Every site and asset, in one register
Organised by field, site and unit — each asset with its QR label, history, inspection plan and spare parts
- Pumpjacks & ESPs
- Gas compressors & engines
- Pumps & loading arms
- Storage tanks
- Separators & pressure vessels
- Safety valves & ESD valves
- Flow computers & meters
- Gensets & power
- Fire water & foam systems
- Pipelines & pig traps
Example
Compressor K-201 trips at 03:40 — what happens next
Called out, fixed and on record — from a station two hours away
- 01
Signal
The unit panel's trip and vibration reach AssetGrid from the station's collector over 4G.
- 02
Alarm & escalation
The on-call rotating equipment technician is alerted; if nobody responds in time, it escalates to the operations supervisor.
- 03
Work order
A work order opens on K-201 with its history, the fixes that worked before and the parts in stock.
- 04
On site
The technician scans the compressor's QR code, replaces a valve and records parts and photos.
- 05
On record
Downtime, running hours and the fix feed the next overhaul plan.
Works with the instruments and controllers you already have
A small collector at each site reads the points you choose — your DCS and safety systems keep control
RTUs, flow computers, compressor and engine panels, tank gauges and RS-485 devices through a gateway.
Existing DCS and SCADA servers, read without touching their control.
Cellular IoT gateways and wireless pressure, level and temperature sensors at remote sites.
PLCs on skids, loading bays and LPG filling lines.
See AssetGrid on your sites
Start with one station or terminal: live readings, alarms and the asset register, then add inspections and maintenance for every site. Every operation is scoped and quoted on its own.
Questions from oil and gas operators
Does it work over 4G, radio or satellite links?
Yes. The collector sends small batches of readings, keeps them on its own disk when the link drops, and sends them when it is back — so the history has no gaps.
Does AssetGrid control our process?
No. Your DCS, PLCs and safety systems keep control. AssetGrid reads the values you choose and only writes where you allow it.
Where does the collector run?
On a PC or industrial computer in the control room or an equipment room at each site. The field instruments stay as they are.
Can it run on our own servers?
Yes. AssetGrid can run on servers in your own network, so field data stays inside your company.
We operate many sites. Does that work?
Yes. Fields, sites and units are locations, so alarms, assets, inspections and reports can be filtered down to one site.